8
To attach the Left Base Panel (A), repeat the previous
step.
3
Attaching the base panels
Place the Back Base Panel (D) on a flat surface.
Insert Small Flathead Screws (BB) through the 2 Hole
Plastic Connector Blocks (HH) into the pre-drilled holes
in the Back Base Panel (D).
Place the Back Base Panel (D) and the Front Base Panel
(C) on their side.
Place the Right Base Panel (B) face down.
To attach the Front Base Panel (C) to the Right Base
Panel (B), insert Screws (JJ) through the Flat Washers
(KK). Tighten to secure with a
Phillips Screwdriver.
To attach the Back Base Panel (D), insert a Small
Flathead Screw (BB) through the previously attached 2
Hole Plastic Connector Block (HH).
1
Preparing the back base panel
2
Attaching the base panels
D
C
C
B
B
A
D
D
BB
HH
JJ
JJ
KK
KK
BB
BB
HH
Assembly