5 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Installation
1
Attaching the mounting bracket to the
junction box
□
Attach mounting unit (AA) to the junction box (not included)
with mounting screws (BB).
NOTE:
The preinstalled support screws on the mounting
unit (AA) should protrude out away from the junction box
with approximately 1/8 in. of adjustability.
BB
AA
2
Making the electrical connections
□
Connect the copper wire on the light fixture (A) to the
mounting bracket (AA) by securing it with the preinstalled
ground screw.
□
Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
nuts (CC) and secure with electrical tape (not included).
NOTE:
If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
CC
AA
A
3
Secure the light fixture
□
Secure the light fixture (A) to the junction box by placing it
over the pre-installed screws on the mounting bracket (AA)
and securing it with the washers (EE) and cap nuts (DD).
NOTE:
Maintain a tight waterproof seal between the
canopy and mounting surface.
AA
A
DD
EE
4
Secure the light fixture
□
Install two E12 candelabra 60-watt bulbs (not included).
A