11
11
"HI, MED, LOW"
buttons:
These three buttons are used to set the fan
speed as follows:
LOW
=Low speed,
MED
= Medium speed
HI
=High speed
"OFF"
button: This button turns the fan off.
The " " button turns the light ON or OFF
and also controls the brightness setting. Press
and release the button to turn the light ON or
OFF. Press and hold the button to set the
desired brightness. The light button has an
auto-resume, it will stay at the same brightness
as the last time it was turned off.
1.
2.
3.
Restore power to the ceiling fan and test for
proper operation.
Operating Your Transmitter
Figure 21
Installing the Battery:
Figure 20
Install
12V MN21/A23
battery (included), to
prevent damage to transmitter, remove the battery
if not used for long periods.
(
WARNING:
May explode or leak if
recharged, disposed of in fire or dissected. Do not
ingest.)