17
17
Assembly (continued)
Place the Back Panel Brackets (MM) between
the back panels and the grooves of the
assembly as shown.
Fasten each Back Panel Bracket (MM) using
Screws (LL). Repeat until all brackets are
securely in place as indicated by the diagram.
18
Securing the back panels
Assembling the rolling doors
R
Q
Locate the Left and Right Rolling Doors (Q and R).
Place the Rolling Door Hangers (NN) on the outside of
the Left Rolling Door (Q).
Insert Bolts (BB) through Flat Washers (DD) and into the
pre-drilled holes on the other side of the door. Tighten
Rolling Door Hangers (NN) through the door using a
Phillips Screwdriver.
Repeat these steps for the Right Rolling Door (R).
LL
MM
DD
BB
NN
