8
Assembly
5
Assembly Pedestal to Desk
Top
□ Place Desk Top (A) upside down on a soft surface
such as blanket or carpet to prevent it from being
scratched.
□ Place Pedestals (C)
which installed to Platform (B)
at step 1
on bottom of Top (A)
□ Tighten Bolts (AA) by Allen Key (BB) from Platform
(B) to bottom of Top (A).
□ Do same above steps for another Base.
(Reference Fig.7)
NOTE:
Tight Slightly till all bolts are completely in
each hole. Then tighten before turn Desk over.
6
Assembly Completed
□ Before turn Desk over, please tighten all assembly
hardware on stretcher.
□ Turn over Desk.
NOTE:
Adjust table level by adjusting bottom
levelers.
Fig.8
(Continued)
B
C
A
Fig.7
