background image

4

Safety Information (continued)

NOTE: 

To avoid injury from unexpected starting or electrical 

shock, do not plug the power cord into a source of power during 
unpacking and assembly. The cord must remain unplugged 
whenever you are adjusting/assembling the fireplace.
If any part is missing or damaged, do not attempt to use or 

plug in the power cord until the missing or damaged part is 
correctly replaced. To avoid electric shock, use only identical 
replacement parts when servicing double-insulated tools.

NOTE:

 Use care in assembling your new fireplace. Take your 

time and use the hardware provided and a quality Phillips head 
screwdriver. Never overtighten bolts.
•  Do not sit on any part of the mantel. 

•  It is recommended to work on a soft surface like a rug or to 

    lay out a blanket to protect the furniture from getting scratched 

    during the assembly process.

NOTE: 

SAVE THESE 
INSTRUCTIONS

WARNING:

 

For use with televisions weighting 60 lbs (20.3kg) or 

less. Use with heavier televisons may causing tip over resulting in 
death or serious injury.                                           
Manufacturer’s name: Longding Enterprise 
Trade name: TV console
Model Number:  23MMP90558-PD01
Date of manufacture: 2020
Factory ID: xxxxxxx

WARNING:

 

Death or serious injury may occu when children climb 

on audio and/or video equipment furniture. A remote control or toys 
placed on the furnishing may encourage a child to climb on the 
furnishing and as a result the furnishing may tip over on to the child.     

WARNING:

 

Risk or death or serious injury, This surface must be 

placed against a fixed in place wall at least as tall as the television.

WARNING:

 

Relocating audio and/or video equipment to furniture 

not specifically designed to support audio and/or video equipment 
may result in death or serious injury due to the furnishing collapsing 
or over turning onto a child.

Summary of Contents for 1005207107

































Reviews: