8
Installation (continued)
3
Unpacking the top
□
Take out the top (B) and backsplash (C) according to the
steps indicated by the drawings, and place them face down
onto a scratch free surface such as a foam sheet that came
in the packaging.
Remove the backsplash and place
it on a scratch free surface
C
Remove the top foam sheet
C
Foam sheet
Remove the foam sheet
B
BACK
FRONT
Remove the top and place it
on a scratch free surface
B
Foam sheet
BACK
FRONT
Remove the cutout foam
sheet & hardware
Hardware
Pack
B
BACK
FRONT
1
2
4
Mounting the sink
□
Apply silicone caulk (not included) to the top edge of the
sink (D). With the help of another adult, lower the sink onto
the back side of the stone top.
NOTE:
Make sure the sink over-flow hole is facing the
front of the stone top. Be sure to align the sink well with
the stone top cut out allowing for equal stone overhang
on the front, back and sides of the ceramic sink (D).
NOTE:
To install the sink onto the top correctly, ensure
that the two “BACK” stamps on the sink and the top are
aligned on the same sides. Use the guide lines marked
on the sink and bottom side of the stone top to assist
with sink location.
2
2
BACK
BACK
D
B
BACK
1
Sink Lip
Top
BACK
BACK
