14
Assembly - Flushmount (continued)
Mounting the fan
6
WARNING:
The locking slots of the celling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
AA
B
AA
□
Carefully unhook the fan from the mounting bracket (B) and
align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (B). Push up to engage the
slots and turn clockwise to lock the canopy (C) in place. Im-
□
Install the remaining two canopy screws (AA) into the holes in
the canopy (C) and tighten firmly.
mediately tighten the two canopy screws (AA) firmly.
C
G
Attaching the fan blades
7
□
With the power off, install the two LED bulbs (I)
(Max. 5W provided) into the light bulb sockets.
Installing the light bulbs and
glass bowl
8
□
Place the glass bowl (H) into the light kit panel, aligning
the three flat areas on the top flange of the glass bowl
(H) with the three raised dimples in the light kit panel.
Turn the glass bowl (H) clockwise until it stops.
H
I
□
Attach the fan blades (A) to the fan motor assembly (G)
by using the blade screws (BB) and fiber washers (CC).
Tighten blade screws (BB) securely.
□
Repeat these steps for the remaining blades (A).
□
Remove and save the set screws (2) on the decorative sheet.
□
Remove the decorative sheet from the top motor housing.
□
Reattach the decorative sheet on top motor housing, line up
the 2 holes, insert the screws and tighten.
A
BB
CC
G
