6
Installation (continued)
Screw the bulbs (not included) into the fixture sockets . This fixture
uses 60-watt MAX, incandescent, Candelelabra-base, SBCFL or
SBLED bulbs. Ensure that you do not exceed the recommended
wattage.
5
Connecting the wires
□
Strip 3/8 in. of insulation from the wire ends of the fixture.
□
Using wire nuts (BB), connect the white fixture wire to the
white (neutral) supply wire from the junction box. Then
connect the black fixture wire to the black (live) supply
wire from the junction box.
□
Connect the ground wire from the junction box and
the ground wire from the fixture to the ground
screw on the round mounting plate (CC). Tighten the ground
screw to secure both ground wires to the round mounting plate
(CC).
□
Wrap electrical tape (not included) around the wire nuts
(BB), and ensure they are secure. Then push all wire
connections into the outlet box.
7
Installing the glass
6
Installing the fixture to the ceiling
Secure the fixture to the ceiling using the two cylinder nuts
(EE). Tighten the cylinder nuts (EE) securely.
8
Installing the bulbs
□
□
BB
Ground screw
Black
White
EE
□
Screw the screws (GG) through the fixture (A) and through
the
glass (B)
.
Lock the exposed teeth tightly using finials (HH).
B
A
HH
GG
