background image

9

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly — Hanging the Fan (continued)

Making the electrical connections

WARNING:

 

Check to see that all connections are tight, 

including ground, and that no bare wire is visible at the wire 
nuts (except for the ground wire).

WARNING:

 

To reduce the risk of fire or electric shock, do 

not use this fan with any solid-state speed control device.

WARNING:

 

To avoid possible electrical shock, be sure 

electricity is turned off at the main fuse box before wiring.

3a

If you feel you do not have enough electrical wiring knowledge 
or experience, have your fan installed by a licensed 
electrician.

Follow the steps below to connect the fan to your household 
wiring. Use the plastic wire nuts (AA) with your fan. Secure the 
plastic wire nuts (AA) with electrical tape. Make sure there are 
no loose strands or connections.

     Make wire connections as follows, using the wire nuts 

(AA).

      

 

From Fan                        To Outlet Box

Black + Blue Wires ---------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
Green Wire ------------------- Green or Bare Wire (Ground)

 

    Turn the wire nut connections upward, spreading them 

apart so the green (ground) and white wires will be on 
one side of the outlet box (GG) and the black and blue 
wires will be on the other side. Carefully tuck the 
connections up into the outlet box (GG).

AA

Neutral

Hot

Black

Ground

conductor

White

Blue

Black

Green

White

GG

Summary of Contents for 1004 120 943




















Reviews: