10
Assembly - Attaching the Blades
Attaching the blades
to the blade brackets
1
□
Attach a blade (F) to the blade bracket (G) by inserting the
screws (AA) into the holes in the blade (F) and through the
blade bracket (G).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
Assembly - Hanging the Fan (continued)
Mounting the fan-motor assembly
(standard mount)
□
Align the locking slots of the canopy (C) with the two screws
(EE) and alignment post (QQ) in the mounting bracket (A).
□
Push up the canopy (C) and turn clockwise until the
alignment post (QQ) engage to the round hole and the
screws (EE) engage to the key slots.
□
Firmly tighten the two mounting screws (EE).
□
Align the oval shape on the canopy (C) with canopy bottom
cover (FF), Push up the canopy bottom cover (FF) until the
screw (EE) heads engage to the slots on the canopy bottom
cover (FF) so that the magnetic canopy bottom cover (FF)
can be attached to the bottom of the canopy (C) properly.
5
WARNING:
When using the standard ball/downrod mounting,
the tab in the ring at the bottom of the mounting bracket
must rest in the groove of the hanger ball. Failure to properly
seat the tab in the groove could cause damage to the wiring.
NOTE:
The magnet is pre-attached on the canopy bottom
cover for you to remove and install easily.
A
EE
C
FF
E
G
F
AA
Fastening the blade assemblies to
the motor
2
□
Fasten the blade/blade bracket assembly to the fan motor
assembly (E) by inserting the alignment into the slot on the
bottom of the motor and tightening the pre-installed blade
bracket screws (PP).
□
Repeat this step for the remaining blade assemblies.
E
PP
G
H
