background image

 10

Care and Cleaning

Troubleshooting

 

Shut off the main power supply before cleaning the product.

 

To clean, wipe with a damp cloth.

 

Do not use abrasive cleaners or cleaners that contain alcohol.

Problem

Possible Causes

Solution

The lights will not turn on

The power is off.

Ensure the power supply is 
turned on.

There is a faulty switch.

Test or replace the switch.

There is a faulty wire connection.

Check the wiring.

The fuse blows or the circuit 
breaker trips when the light is 
turned on.

There are crossed wires or the power 
wire is grounding out.

Discontinue use of the fixture.
Check the wire connections or
contact a qualified electrician.

NOTE:

 The LED module is dimmable to 10% brightness with Electronic Low Voltage (ELV) type dimmers.  

See list below for known compatible controls:

Lutron:

DVELV-300P
NTELV-300
VTELV-600
MAELV-600
SPSELV-600

We do not recommend using digital dimmer controls.

Compatibility with incandescent dimmers varies by load. Due to this factor, we recommend Electronic Low Voltage 
(ELV) type dimmers for best performance.

NOTE:

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Leviton:

AWRMG-EAW
6615-P

Summary of Contents for 1001571764













Reviews: