7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Installation
1
Installing the glass shade
□
Loosen the pre-assembled screws (AA). Secure one side cover (B) with the LED heat-sink groove (C) by screwing one screw
(AA) in the pre-drilled edge hole of the side cover (B) and back to the pre-drilled hole of the LED heat-sink groove (C). Then
screw the cap (A) in the pre-drilled center hole of the side cover (B).
□
Insert the glass shade (D) into the glass holder (E) via the heat-sink groove (C). Then secure the other side cover (B) with the
LED heat-sink groove (C) by screwing one another screw (AA) in the pre-drilled edge of the side cover (B), and then back to the
pre-drilled hole of the LED heat-sink groove (C). Finally screw the other cap (A) in the pre-drilled center hole of the side cover
(B).
2
Installing the mounting plate to the outlet box
□
Mount the mounting plate (DD) to the outlet box using the two provided outlet box screws (CC). The side of the mounting plate
(DD) marked “GND” must be faced out.
B
C
D
E
AA
DD
CC
