12
Operation steps
Operation
5
How to use drainpipe
Before using
1. Press power switch, put through power, the machine is in state of beginning
4. Select appropriate water level according to your laundries quantity.
5.Press WATER TYPE to select HOT
COLD or WARM water for
wash, during the rinse process, it will inlet cold water.
6. Close the top lid, press START/PAUSE, the washing machine is working.
7. When the washing is finished, buzzer alarm, power supply cut off automatically.
0
1
2
3
4
5
Times of pressing
the
process
button
Selected procedure
program
Applicable
procedure
Contents(the lighted indicator
indicate the programs about
to run)
Wash, rinse, spin
Soak, wash,
rinse ,spin
Wash
when use detergent
repeatedly
Wash light is on
Wash, rinse
Rinse ,spin
Spin
Standard program
For dirty laundries
No need to spin for
laundries creased easily
Wash by hand and
need to rinse and rinse
Wash by hand and
only need to spin
Wash rinse and spin
lights are on
Soak, wash, rinse and
spin lights are on
Wash and rinse lights
are on
Rinse and spin lights
are on
Spin light is on
Remarks: press PROCESS button continually, the above mode will be
cycled in turn.
2. Press
program button to select proper program
3. Press
process button to begin process selection
1). if there is no water in inner tub,washing machine is in state of "FUZZY",the state details
as per each model's button explanation. Now press "START/PAUSE" button (press
"PROGRAM" and select "STRONG",the washing machine is in state of "FUZZY"), the
washing machine will start fuzzy sensor and to sensor the weight of laundries and set
water level automatically.
2). If there is water in inner tub, washing machine is not in state of "FUZZY",the state details
as per each model's button explanation.Now press "PROGRAM" and"PROCESS" to select
proper program and process.
Operation steps
1.the drainpipe must be hanged during use, the
height is not more than 1.2m to avoid leakage or stop,
if drain a long time, the machine will stop running.
2. You can adjust the situation of the elbow bend
pipe to change the height of the drainpipe.
3. Do not extrude the drainpipe to ensue drain smoothly.
Drainpipe
Elbow
Less than 1.2m
Summary of Contents for HCWP1605
Page 1: ......