4
USING YOUR TOASTER
1. Put bread slice into the bread slot. A maximum of two bread slices can be inserted into
bread slot each time.
NOTE: 1) Make sure the crumb tray is completely positioned in place before using.
2. Plug the power cord into a mains power outlet.
3. Set color control knob to your desired browning color. Settings range from 1 to 7 (see
Fig.1), the lowest
“1”
is for lightest and the highest
“7”
is for darkest. The bread slice
can be toasted to golden colour at the middle position.
NOTE: 1). Toasting colour for one slice is darker than that for two
bread slices at the same level.
2). If toasting continuously, toasting color for the latter
bread will be darker than that of the bread when the
toaster is cooled down.
4. Lower carriage lever down vertically until it is latched in place. The indicator for
CANCEL
will be illuminated, and the appliance will begin toasting.
NOTE: The carriage lever will only latch when the toaster is connected to mains power.
5. Once the bread has been toasted to the preset color, the carriage lever will automatically
pop up.
NOTE: During toasting, you may also observe the toasting colour. If it is satisfactory,
you can press the CANCEL button to cancel the operation at any time, but never lift
the carriage lever to cancel toasting.
6. If you want to toast frozen bread, first press
DEFROST
button and the indicator of
DEFROST
button will be illuminated. Set control knob to your desired browning
setting, and then lower the carriage lever down vertically until it is latched in place. In
this mode, bread will be toasted to your desired color.
7. If you want to warm cold toasted bread, first press the
REHEAT
button and the
indicator of
REHEAT
button will be illuminated, and then lower the carriage lever
vertically until it is latched in place. In this mode, the toasting time is fixed, the carriage
lever will automatically spring up when the reheating process has ended.
Fig.1
