Assembly
Assembling the LED Haunted Carriage and Skeleton
Step 1. Align the Halves of Carriage (C) then insert the rods of one half into the matching holes of the
other half. (FIG.1)
Step 2. Insert the rods of two of the Wheels (D) into the matching holes at the rear bottom of the
Carriage (C). Attach one of the Bracket (E) to the two rear wheels. (FIG.21)
Step 3. Insert the rods of the Carriage Roof (B) into the matching holes on the top of Carriage (C). (FIG.3)
Step 4. Insert the rods of the other two Wheels (D) into the matching holes on the front bottom of the
Carriage (C). Insert the rods on the remaining Bracket (E) into the matching holes on the two front
Wheels (D). (FIG.4)
Step 5. Insert the rods on the Foot Rest (G) into the holes on the front of the Carriage (C). Open the Bench
Seat (F) then insert the rods at the bottom of Bench Seat (F) into the matching holes on the Foot
Rest (G). Insert the hooked supporting rods on the inside front of Foot Rest to the holes on the
lower front of the Bench Seat. (FIG.2). Insert the rods on the bottom of Foot Rest (G) into the
matching holes on the top of the front Wheels (D). (FIG.5)
Step 6. Secure the Wheels and Carriage together using the Bolt & Wingnuts (H). Secure the Bench Seat,
Foot Rest and Carriage Roof to the Carriage with the Plastic Ties (J). (FIG.6)
Step 7. Place the Skeleton (A) on the Bench Seat of the Carriage and secure using Plastic
Ties. (FIG.7) Use the large Plastic Ties to secure the Skeleton to the Carriage. Attach
the Plastic Ties thru the loop on the Carriage and wrap around the arm just below the
shoulder.
Step 8. Secure the Haunted Carriage and Skeleton to the ground with Ground Stakes (I). At
the base of Wheels. (FIG.8)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 12 Watts
(0.1 Amps) for Haunted Carriage and Skeleton. Do not connect to another lighting
string, decorative outfit or other electrical products. Before you use or re-use this
product inspect it carefully. Return to place of purchase with receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secured and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2
FIG.3
FIG.4
FIG.5
FIG.6
FIG.7
FIG.8
