Assembly
Assembling the Tinsel Sheep
Step1.Align two halves of Body( C ) and insert the rod of one halve into the matching holes in
another. (FIG.1)
Step 2.Insert the Legs( E&F) into the matching holes of the Body .(FIG.1)
Step3.Insert the Mouth/Fhace(A) into the matching holes of the Head(B) .(FIG.1)
Step 4.Insert the rod of Head (B) and Tail (D) into the matching holes of the Body(C).Insert the
rod of Tail (D) into the rear of the Body (C)(FIG.1)
Step 5.Fasten with Plastic Tie (H) and secure the Sheep to the ground with the Ground Stakes (G) .
(FIG.2)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 4.8 Watts
(0.04 Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase if the product has cuts, damage,
frayed wire insulation on cords, cracks in the socket enclosures, loose connections
or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secure and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2
