ASSEMBLY
1. Assembling the Legs to the Body
Insert the metal connecting rods attached to each Leg (E & F) into the
matching holes on the underside of the Body (D) and fasten them
together at the connecting loops with Plastic Tie (I). The Legs come with
metal bars attached to stabilize the Deer. Insert the hooked end of the
metal bars into the metal nut on the opposite Leg.
Notes: The Bow is pre-assembled on the Body.
2. Assembling the Tail and Head to the Body
Insert the connecting rod on the Tail (G) into the connecting hole at the rear
of the Body (D). Insert the connecting rods on the bottom of the Head/Neck
(B) into the matching holes on the front of the Body and fasten them
together at the connecting loops with Plastic Tie (I).
3. Assembling the Antlers and Ears to the Head
Insert the connecting rods on both Antlers and Ears (A&C) into the
connecting holes at the top of Head (B). Note: The ears go to the outside
of the Antlers
4. Securing the Deer to the Ground
Secure the Deer to the ground with the Ground Stakes (H).
