ASSEMBLY
1. Assembling the Legs to the Body
Insert the metal connecting rods attached to each Leg (E&F) into the
matching holes on the underside of the Reindeer Body (D) and fasten
them with Plastic Tie (N). The Legs come with metal bars attached to
stabilize the Deer. Insert the hooked end of the metal bars into the metal
nut on the opposite Leg.
2. Assembling the Tail to the Body
Insert the connecting rod on the Tail (G) into the connecting holes at the
rear of the Body (D).
3. Assembling the Head / Neck to the Body
Insert the connecting rods on the bottom of the Head/Neck (B) into the
Connecting holes on the front of the Body (D) and fasten them with
Plastic Tie (N).
4. Assembling the Antlers and Ears to the Head
Insert the connecting rods on both Antlers and Ears (A&C) into the
connecting holes at the top of Head (B).
5. Assembling the Runners
The Sleigh has 4 Runners (J). Two Front and two Rear. Insert the
connecting rods on each Front Runner into the matching holes on the
Rear Runners. Fasten with Plastic ties. Hook each Horizontal Stabilizing
Bar into the matching holes on the opposite side Runner.
6. Assembling the Decorative Runner Cap to the Front
Runner
Insert the connecting rod on the Decorative Runner Cap (K) into the
matching hole of the front of the Runners (J) and fasten them with Plastic
Tie (N).
7. Assembling
the
Side
Panels to the Rear
The Sleigh has 4 Sides Panels (I). Two Front and 2 Rear. Insert the
connecting rods on each Front Side Panel into the matching holes on the
Rear Side Panels. Insert the connecting rods on the bottom of the Side
Panels (I) into the matching holes on the top of the Runners. Fasten with
Plastic Ties (N).
8. Assembling the Front and Back Panel to the Side Panel
Insert the connecting rods on the bottom of the Front and Back Panel (H)
into the matching holes on the top of the Seat Panel (H). Insert the
connecting rods on the top of the Front and Back Panels into the holes on
the Side Panels (I). Insert the connecting rods on the bottom of the Seat
Panel into Runners. Fasten with Plastic Ties (N).
9. Assembling the Bow to the Reindeer and Sleigh
Insert the wire tie on the Bow (L) through the holes of the material on
Reindeer and Sleigh then twist the wires together to secure.
10 Securing the Reindeer and Sleigh to the Ground
Secure the Reindeer and Sleigh to the ground with the Ground Stakes (M).
