ASSEMBLY
1 Assembling the Legs to the Body
Insert the metal connecting rods on each Leg (E,F) into the matching
connecting holes on the underside of the Body (C). The Legs come
with metal bars attached to stabilize the Doe. Insert the hooked end
of the metal bars into the metal nut on the opposite Leg.
2 Securing the Legs to the Body
Fasten the Legs and Body together at the connecting loops with Plastic
Ties (J).
3 Assembling the Head to the Body
Hang the hooks on the back of the Head/Neck (B) onto the top front of
the Body. Insert the connecting rods on the bottom of the Head/Neck
(B) into the matching connecting holes in the Body (C) and fasten
around the metal frames with the Plastic Ties (J).
4 Assembling the Ears to the Head/Neck
Insert the connecting rods on both Ears (A) into the matching connecting
holes at the top of Head/Neck (B).
5 Assembling the Tail to the Body
Insert the connecting rod on the Tail (D) into the connecting hole at the
rear of the Body (C). Insert the wires on the backside of the Bow (G)
through the material of the Doe then twist the wires together to secure.
6 Assembling the Ground Stakes
Insert the Ground Stakes (K) over the metal frame at each hoof then
firmly into the ground.
E
C
F
J
C
B
J
B
A
D
C
G
K
