ASSEMBLY
1. Assembling the Legs to the Body
Insert the metal connecting rods attached to each Leg (F&G) into
the matching holes on the underside of the Body (D) and fasten them
together with Plastic Tie (N). The Legs come with metal bars attached
to stabilize the Deer. Insert the hooked end of the metal bars into the
metal nut on the opposite Leg.
2. Assembling the Tail to the Body
Insert the connecting rod on the Tail (E) into the connecting hole at the rear
of the Body (D).
3. Assembling the Neck and Head to the Body
Insert the connecting rods on the bottom of the Neck (H) into the
connecting holes on the front of the Body (D). Insert the connecting rods
on the bottom of the Head (A) into the connecting holes at the top of
Neck. Fasten all parts together at the connecting loops with Plastic Ties
(N).
4. Assembling the Antlers and Ears to the Head
Insert the connecting rods on both the Antlers and Ears (C&B) into the
connecting holes on the top of Head. Note: The Ears go to the outside of the
Antlers.
5. Assembling the Bow and Securing the Deer to the
Ground
Insert the tie wires on the Bow (L) through the holes of the material on the
Sleigh then twist the wires together on the backside to secure. Secure the
Deer to the ground with Ground Stake (M).
6. Assembling the Runners and Side Panels
Unfold the two Runners (J). Attach the horizontal stabilizing bars on one
side of Runners to the opposite side Runner and fasten them with Plastic
Tie (N). The Sleigh comes with 4 Side Panels (K). Two Front and two
Back. Insert the connecting rods on the Front Side Panels into the
matching holes on the Back Side Panels and fasten with Plastic Ties (N).
7. Assembling
the
Side
Panels to the Runners
Insert the connecting rods of the bottom of the Side Panels into the
matching holes on the top of the Runners then fasten with Plastic
Ties (N).
8. Assembling the Interior Panels (Front, Seat and Back)
Unfold the Interior Panel (I). Insert the connecting rods on the Interior
Panel Seat into the connecting holes on the Runners. Insert the connecting
rods on the Interior Panel Front and Back into the connecting holes on each
side of the Side Panel and fasten with Plastic Ties (N).
9. Attaching the Bow and Securing the Sleigh to the
Ground
Insert the wires of the Bow (L) through the material of the Sleigh then twist
the wires together to secure. Secure the Sleigh to the ground with Ground
Stake (M).
