ASSEMBLY
1 Assembling the Body
Align the two Halves of Body (C) with each other and insert the
connecting rods on one half into the connecting holes on the other
half then fasten together at the connecting loops with Plastic
Ties (N).
2 Assembling the Support Pole and Support Frame
Insert the top (single connecting rod) of the Support Frame (J) into the
connecting hole on the underside of the Body (C) and secure with Cotter
Pin (L). Insert the tapered top of the Support Pole (I) into the connecting
pole at the back underside of the Body. Lock with integrated pin..
3 Assembling the Hind Legs to the Body
Insert the connecting rods on the top of the Hind Legs (E) into the
connecting holes on the underside of the Body (C) and fasten together
at the connecting loops with Plastic Ties (N).
4 Assembling the Base Stand to Support Pole and Support
Frame
Insert the connecting rods at the bottom of the Support Frame into the
connecting holes on the front of the Base Stand (K). Insert the bottom of
the Support Pole (I) from Body into the connecting pole on the back of the
Base Stand. Secure with integrated locking pin.
5 Assembling the Front Legs and Head
Insert the connecting rods on both Front Legs and Head (D,A) into the
matching holes of Body (C) and fasten together at the connecting loops
with Plastic Ties (N).
6 Assembling the Ears and Tail to the Body
Insert the connecting rods on both Ears (B) into the connecting holes on
the top of Head (A). Insert the connecting rod on the Tail (F) into the
connecting holes at the rear of the Body (C) and fasten together at the
connecting loops with Plastic Ties (N).
7 Assembling the Disc and Scarf
Insert the connecting rods on the Disc (G) into the connecting holes
on the front of the mouth. Wrap the Scarf (H) around the neck of
Dog.
8 Securing the Retriever to the Ground
Secure the Dog to the ground with the Ground Stakes (M) by placing the
Ground Stake over the metal frame at the four corners of the Base Stand
then into the ground.
