Assembly
Assembling the Tinsel Polar Bear with Flag
Step 1. Align the two Halves of Body (B) with each other and insert the rods on one half into the
holes on the other half then fasten them together with the Nylon Tie (J). Insert two posts of each
Leg/foot (D) into the matching holes on the underside of the Body then fasten them together with
the Plastic Tie (J). (FIG.1)
Step 2. Insert the rods of the Head (A) into the holes on the Body and fasten them together with
the Plastic Ties. Insert the rods of each Arm (C) into the matching holes in the Body. (FIG.2)
Step 3. Connect the two Flagpole Sections (F) together and attach the Flag (E) to the top of the Flagpole
then fasten them together with the Plastic Tie (J) .(FIG.3)
Step 4. Insert the rod on Flagpole (F) into the holes on the hands of the Bear. (FIG.4)
Step 5. Secure the Bear to the ground with the Ground Stakes (G). (FIG.4)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 81.6 Watts
(0.68Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
B
D
A
D
E
F
FIG.1
FIG.2
FIG.3
FIG.4
