ASSEMBLY
1 Assembling the Igloo
Align the Igloo Sides (A) flat on the floor so the side with the opening
is facing out. Insert the connecting rods on each Igloo Side (A) into
the matching connecting holes on the side next to it.
2 Assembling the Door to the Igloo
Insert the connecting rods on the Door (B) into the matching connecting
holes on the Side with the opening then fasten all Sides and the Igloo
(A) together over the metal frame with the Plastic Ties (Q).
3 Assembling the Body, Bill & Hat of Penguin on top of Igloo
Align the two Halves of Penguin Body (E) with each other then insert
the connecting rods on one half into the connecting holes on the other
half and fasten together over the metal frames with Plastic Ties (Q).
Insert the connecting rods on the Hat (D), Bill (G) into the connecting
holes on the Penguin's head.
4 Assembling the Wings and Feet of Penguin on top of Igloo
Insert the connecting rods on the Wings (F) and Feet (H) into the matching
connecting holes on the Penguin's Body (E).
5 Assembling the Body, Bill & Hat of Penguin on Ice Cube
Align the two Halves of Penguin Body (L) with each other then insert the
connecting rods on one half into the connecting holes on the other half
and fasten together over the metal frames with Plastic Ties (Q). Insert
the connecting rods on the Hat (J) and Bill (I) into the matching
connecting holes on the Penguin's head.
6 Assembling the Wings of Penguin on Ice Cube
Insert the connecting rods on the Wings (K) into the matching connecting
holes on the Penguin Body (L) standing on Ice Cube. Secure the Penguin
to the Ice Cube Base (M) by inserting the connecting rods on the bottom
of the Penguin's feet into the connecting holes on the top of the Ice Cube
Base.
7 Assembling
the
Fishing Pole and Scarves
Insert the connecting rods on the bottom of the Fishing Pole (C) into the
connecting holes on the Penguin's chest area, that stands atop the Igloo
(A) then secure the Penguin to the top of Igloo by inserting the
connecting rods on the bottom of the Penguin's feet into the connecting
holes on the top of the Igloo. Wrap the two Scarves (N) around the neck
of each Penguin (E & L).
8 Assembling the Ground Stakes
Insert the Ground Stakes (R) over the metal frames at four points around
the bae of the Igloo and on two sides of the Ice Cube Base then press
the Ground Stake firmly into the ground.
A
Q
B
A
D
G
E
Q
E
F
H
I
J
Q
L
K
L
M
C
N
E
A
N
R
R
L
