Assembly
Assembling the SNOWMAN with CARDINALS
Step 1. Align the two halves of the Lower Body (E) with each other and insert the connecting rods on one half into the
matching holes in the other half then fasten them with Plastic Ties (K). (FIG.1)
Step 2. Align the two halves of the Upper Body (D) with each other and insert the connecting rods on one half into the
matching holes in the other half then fasten them with Plastic Tie (K). Insert the rods on the bottom of the Head (B) into
the holes on the top of Upper Body and insert the connecting rod on the Nose (C ) into the matching hole of the Head
(B) then fasten them with Plastic Tie (K). (FIG.2)
Step 3.
Stand the Lower Body (E) section in an upright position. Insert the metal connecting rods on the bottom
of Upper Body (D) into the holes at the top of Lower Body (E) then fasten them with Plastic Ties (K). (FIG.3)
Step 4. Insert the connecting rods of each Arm/Hand (F) into the matching holes on the Upper Body (D) . Insert the
connecting rod on Hat (A) into the matching holes on the Head (B). Insert the connecting rods of two Birds (H) into the
matching holes on Hat (A) and Left Hand (F). (FIG.4)
Step 5. Wrap the Scarf (G) around the neck of the Snowman. (FIG.5)
Step 6 & 7. Secure the Snowman base to the ground with the "U" Shaped Ground Stakes (J) (FIG.6) then hook the
plastic end of each of each anchoring Strings (I) onto the matching loop on the shoulder area of the Body. Put the "U"
Shape Stake (J) through the free end of each Anchoring String (I) then tightly secure to the ground evenly. (FIG.6&7)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 14.4 Watts (0.12Amps). Do not overload.
Do not connect to other lighting strings, decorative outfit or other electrical products. Before you use or re-use this
product inspect it carefully. Return to place of purchase or consult a certified Electrician if the product has cuts, damage
or frayed wire insulation on cords, cracks in the socket enclosures, loose connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the
product, wire and lighting connections. If the product is placed somewhere other than the ground it should be well
secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.4 FIG.5
FIG.6 FIG.7
FIG.1 FIG.2 FIG.3
