Assembly
Assembling the Tinsel Ghost Tree
Step 1. Insert the the connecting rods on one half of the Upper Section of Tree (A) and Lower
Section of Tree (B) into the matching holes in the other half then fasten together with the
Plastic Ties (F). (FIG.1)
Step 2. Insert the rods at the bottom of the Upper Section (A) into the holes at the top of the Lower
Section (B) of Tree and fasten with Plastic Ties (F). (FIG.2)
Step 3. Insert the the connecting rods on each Arm/Hand ( C.D ) into the Upper Section of Tree (A).
(FIG.3)
Step 4. Secure the Ghost Tree to the ground by inserting the Ground Stakes (E) at base. (FIG.4)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 12 Watts
(0.1Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical product. Before you use or re-use this product inspect it
carefully. Return to place of purchase with purchase receipt. if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secured and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1
FIG.2
FIG.3
FIG.4
