ASSEMBLY
1. Assembling the Body and Arms, Leg/Boots to the Body
Align two Halves of Body (B) and insert the connecting rods on one half
into the connecting holes on the other half then fasten together with
Plastic Ties (G). Insert the connecting rods on the top of each Leg/Boot
(C) into the connecting holes at the bottom of the Body and fasten
together with the Plastic Ties (G). Insert the connecting rods of left Arm
(D) into the matching holes on upper Body. Secure with Cotter Pin (E).
Insert the end of the long Connecting Bar attached to the Motor into
the tube on the end of the left Arm and lock with the Cotter Pin (E).
2. Assembling the Head and Arms to the Body and Securing
the Santa to the Ground
Insert the connecting rods on the bottom of the Head (A) into the
connecting holes on the top of the Body then fasten together with Plastic
Ties (G). Insert the connecting rods on right Arm (D) into the connecting
holes on the Body and fasten together with Plastic Ties (G).
Secure the Santa to the ground with the Ground Stakes (F).
B
C
A
D
