ASSEMBLY
1 Assembling the Body
Align the two Halves of Body (D) with each other and insert the
connecting rods on one half into the connecting holes on the other
half then fasten together at the connecting loops with the Plastic
Ties (L).
2 Attach the Leg/Foot to Base Stand and Body
Insert the connecting rods at the top of Base Stand (G) into the connecting
holes at the bottom of both Leg/Foot (F) and fasten at the connecting loops
with the Plastic Ties (L).
3 Assembling the Body to the Legs/Feet
Insert the connecting rods on the top of the Legs/Feet (F) into the
connecting holes at the bottom of the Body (D) and fasten at the
connecting loops with the Plastic Ties (L).
4 Assembling the Arms to the Body
Insert the connecting rods on both Arms (E) into the matching connecting
holes on the side of the Body (D) and fasten the Body, Legs/Feet and Base
Stand together at the connecting loops with the Plastic Ties (L).
5 Assembling the Head to the Body and Sideburns to Head
Insert the connecting rods on each Sideburn (C) into the connecting holes
on the sides of the Head (B). Insert the connecting rods on the bottom of
the Head (B) into the matching connecting holes at the top of Body (D)
and fasten at the connecting loops with the Plastic Ties (L).
6 Assembling the Hat to the Head
Insert the two connecting rods at the bottom of the Hat (A) into the
connecting holes on top of the Head (B) and fasten at the connecting
loops with the Plastic Ties (L).
7 Assembling the Axe and Axe Poles
Insert a lower section of the Axe Pole (I) into the connecting hole on the
right side of the Base Stand (G). Insert the middle section of the Axe Pole
through the right hand then into the top of the lower section of Axe Pole.
Attach the Axe (H) to the top of the middle section of the Axe Pole.
8 Assembling the Ground Stakes
Insert Ground Stakes (M) over the metal frame of each ground connecting
loop on the Base Stand then into the ground firmly.
D
L
F
L
G
F
D
L
L
D
E
B
C
L
D
B
L
A
H
I
G
M
