ASSEMBLY
1 Assembling the Bottom Hoop Base Stand
Place the matching rounded three Base Section Poles (E) on the floor
in a circle. Insert the tapered end of each Pole Section into the end of
the section next to it.
2 Assembling the Upper & Lower Section Poles and Tree
Top Metal Bracket
Insert the Lower Section Poles (D) into the Base Section (E) by matching
the connecting rod and connecting hole. Insert the Upper Section Poles
(C) into the matching Lower Section Poles (D). Insert the top tapered end
of the Upper Section Poles (C) into the matching connecting holes on the
Tree Top Metal Bracket (B) to shape the contour of the cone tree.
3 Assembling the Lighting Sets with the Tree Topper
Insert the plastic mounting rod on the bottom of the Star Tree Topper (A)
through the matching connecting hole on the top of the Tree Top Metal
Bracket (B). Drape the Lighting Set (A) by aligning each lighting string
with the stacked poles of the cone then fasten the lighting string to holes
on the base section pole (E) with the wire ties attached to the end of the
lights .
4 Securing the Cone Tree to the Ground
Secure the Cone Tree to the ground using the Ground Stakes (H) by
placing the Ground Stake over the metal frame at four points on the
Bottom Hoop Base Stand then firmly into the ground.
E
B
E
C
D
A
B
E
H
