ASSEMBLY
1 Assembling the Lower Body to the Round Base Stand
Insert the connecting rods on the bottom of the Lower Body (G) into the
connecting holes on Round Base Stand (L) and fasten them together at
the connecting loops with Bolt & Wingnut (M). Attach one end of the
Stabilizing Bar (K) to the connecting hole on the Round Base Stand and
the other end into the connecting hole on the top of the Lower Body.
2 Assembling the Tail to the Lower Body
Fasten the Lower Body and the Stabilizing Bar together with Cotter Pin (R).
Insert the connecting rods on the Tail (H) into the connecting holes on the
Lower Body (G).
3 Assembling the Middle Body
Align the two Halves of the Middle Body (F) with each other. Insert the
connecting rods on one Half into the connecting holes on the other Half
and fasten them together at the connecting loops with Plastic Tie (N).
4 Assembling the Middle Body to the Lower Body
Insert the connecting rods on the bottom of the Middle Body (F) into the
connecting holes on the top of the of Lower Body (G) and fasten them together
at the connecting loops with Plastic Tie (N).
5 Assembling the Upper Body to the Middle Body
Align the two Halves of Upper Body (E) with each other. Insert the
connecting rods on one Half into the connecting holes on the other Half
and fasten them together at the connecting loops with Plastic Ties (N). Insert
the connecting rods on the bottom of the Upper Body into the holes at the top
of the Middle Body (F) and fasten them together at the connecting loops with
Plastic Ties.
6 Assembling the Head and Arms to the Body
Insert the connecting rods on the Head & Arm (D & I) into the
matching holes on the Upper Body and fasten them together at the connecting
loops or over the metal frames with Plastic Ties.
7 Assembling the Hair and Tiara to the Head
Insert the connecting rods on the Upper Hair (B) into the matching
holes on the Lower Hair (C) and fasten them together over the metal frames
with Plastic Ties. Insert the connecting rods on Upper Hair (B) into the
connecting hole on the Head. Insert the connecting rod on the Tiara (A) into
the connecting hole on the Upper Hair (B).
8 Attach the Necklace and Secure the Mermaid to the Ground
Hang the Necklace (J) around the neck of the Mermaid. Secure the
Mermaid to the ground by using the Ground Stake (Q). Place the Ground Stakes
over the 4 corners of metal frame on the Round Base Stand then into the
ground.
