Package Contents
Pre-Assembly
Part
D
A
Description
Tree stand
Tree top
Tree center, Sticker 2
Tree center, Sticker 1
B
C
1
1
1
1
Quantity
Christmas Tree
Model: TG90P3742S00
Sku # 1003 173 212
Operation
Turning on the tree
Maintenance
Spare parts
Repairing Loose Hinges
Use and Care Instructions
WWARNING -
Risk of fire: This product employs overload
protection (fuse lamp) in each series light circuit to provide
overload protection in addition to the fuse(s) located in the
plug. Do not replace the fuse lamp contained in this set with
any other type of lamp, use only spare fuse lamps provided
with this product. In case of a burnt out FUSED lamp, the entire
series of 50 lamps will be out. To replace the fused lamp:
User servicing instructions
Fused Lamp Replacement
The tree
does not
light
Troubleshooting
Problem
Solution
Ensure that all tree sections are plugged into
each other and that the tree is plugged into the
wall. If your tree came with a foot pedal, step on
the On/Off button.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with the
replacement fuses provided.
For blown fuses (if applicable), please refer to
User Servicing Instructions – Fuse Replacement
and replace as instructed.
TM
NOTE:
If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs. Replace
bulbs promptly with the replacement bulbs provided in
order to maintain the performance and life expectancy of
your tree.
Step 1.
Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2.
If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins,washers, bulbs, and
fuses for any replacement or repair that you need to perform
on your tree. If extra parts are needed, contact the Customer
Service Team at 1-877-527-0313 between the hours of 8 am
and 5 pm EST,Monday through Friday.
Step 1.
Place the branch into the slot of the bracket
Step 2.
Insert a new hinge pin through the holes of the
bracket and secure with a washer.
1. Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove
all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully
remove the product rom wherever it
is placed, including tree, branches,
or bushes, to avoid any undue strain
or stress on the product conductors,
connections, and wires. Cover the
protective cap on the poles to avoid damaging the internal
parts.
6. When not in use, store neatly in a cool, dry location
protected from sunlight.
1. Grasp the plug and remove from
the receptacle or other outlet
device. Do not unplug by pulling
the cord.
2. Locate the fused lamp with gray
color lamp holder. Pull the burnt
fused lamp and plastic lamp base
straight out of the lamp holder.
3. Replace with a spare fused lamp.The fused lamp can be
distinguished by a gray lamp base and an additional clear
plastic cover.
4. Plug in the lights again.
SPARE FUSE
Fuse replacement
1. Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by
pulling on cord.
2. Open fuse cover.Slide open
fuse access cover on top of
attachment plug towards
blades.
3. Remove fuse carefully.
4. Risk of fire.Replace fuse only
with 5, 7 or 10 Amp, 125Volt fuse for the power cord set.
5. Close fuse cover. Slide closed the fuse access cover on top
of attachment plug.
6. Risk of fire.Do not replace attachment plug.Contains a
safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.
