Christmas Tree
Model: TG76M2X88L00
Sku # 1002 469 164
Pre-Assembly
Pre-Assembly
Package Contents
Part Description Quantity
A Tree top, tag 3 1
B Tree center, tag 2 1
C Tree bottom, tag 1 1
D Tree stand 1
E Remote Controller 1
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should
always be followed, including the following:
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are used
in outdoor applications, connect the product to a Ground
Fault Circuit Interrupting (GFCI) outlet. If one is not provided,
contact a qualified electrician for proper installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails,
or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or extension
cords, as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material
that is not a part of the product when in use.
m. Read and follow all instructions that are on the product or
provided with the product.
n. Risk of fire. This product does not contain lamp shunts, which
allow the product to operate if one lamp burns out. Lamps
are non-replaceable..
o. To reduce the risk of fire or electric shock, do not attempt
to replace lamps or modify string.
p.
SAVE THESE INSTRUCTIONS.
Assembly
Step 1 Before you start to assemble your tree, choose an
appropriate location near a wall outlet.
Step 2 Assemble the tree stand and place on a level surface.
(See Fig. A)
2
Insert Section 1 into the tree stand.
1
Section 1
Section 3
Section 2
Remove tree stand and tree sections
from box.
Set Up
*Electrical Rating For The Tree
(For Indoor Use Only)
Input:120V, 60Hz, 0.35A Max.
Output: 29V 0.69A
Section 3
Section 2
Section 1
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Control Box
Step 3 Each tree section is numbered with a tag. Please identify
all sections before assembling.
Step 4 Assemble the tree from bottom to tree top. Start with the
bottom section and remove the protective cap before
inserting into the assembled stand. Make sure the pole is
firmly inserted and secured into the stand.
Fig. B - Tree and Light Assembly
Fig. A - Tree Stand Assembly
Unfold the legs and lay the stand in a flat area. Then slide the locking
disc downward and snap into place.
Insert
Adapter Into
Wall Outlet
Foot Pedal
on/off Switch
