Christmas Tree
Model: TG66M3W89D16
Sku # 1004 044 654
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the adapter from the wall and then unplug each
section of the tree.
Step 3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and
tape it shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
Step 7.
Keep out of reach of pets and children.
Press the selector button on the “Light Controller”
to select among:
(1) CLEAR - MULTI: FADING;
(2) CLEAR: FADING;
(3) CLEAR - MULTI: ALTERNATING;
(4) CLEAR: STEADY;
(5) CLEAR - MULTI: SLOW FADING;
(6) MULTI: STEADY;
(7) MULTI: FADING;
(8) COMBINATION.
HOW TO USE THE DUAL COLOR LIGHT CONTROLLER:
User servicing instructions
Light
Controller
Selector
Button
CAUTION:
Use only power adapter that was provided
with this product. Using a different power adapter will damage the
lights and cause fire, electrical shock hazard.
TM
Problem
Solution
The tree does not
light
Ensure that all tree sections are plugged into
each other and that the tree is plugged into
the wall. If your tree came with a foot pedal,
step on the On/Off button.
Check for loose, broken, or missing bulbs and replace
as needed with the replacement bulbs provided
Troubleshooting
Spare parts
Repairing Loose Hinges
This tree package includes hinge pins, washers and bulbs, for any
replacement or repair that you need to perform on your tree. If
extra parts are needed, contact the Customer Service Team at
1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday
through Friday.
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the bracket and
secure with a washer.
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/or broken, loose, or missing bulbs. Replace bulbs
promptly with the replacement bulbs provided in order to
maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and plug the
adapter into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the On/Off
button.
Operation
Maintenance
Step 1.
Grasp the power adapter or power cord plug, and than
unplug from the power outlet. Do not pull the power cord.
LAMP REPLACEMENT
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base straight
out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
(Reference figure only)
