background image

© Seasonal Visions International

Emeryville, CA 94608

Tel: 510-428-3921

All Rights Reserved

MADE IN CHINA

NOTE

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may 
cause undesired operation.
Warning

Changes or modifications to this unit not expressly approved by the party 

responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if 
not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one 
or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

· Consult the dealer or an experienced radio/TV technician for help.

WARNING

To prevent risk of personal injury, fire, and electric shock:
· Never leave unit unattended while plugged in. Unplug when not in use or refilling.
· Connect only to a properly grounded outlet.
· For use only in covered areas. Keep unit dry, do not expose to rain or moisture. 
· Keep product out of reach of children. Use only under adult supervision.
· Clean unit before storage to avoid damages.

CAUTION

· Risk of burn, fire or electric shock.
· Please read instruction manual before using.
· Don’t immerse in liquid.
· Changes or modifications not expressly approved by the party responsible for 

compliance could void user’s authority to operate the equipment.

STORAGE

When not in use, store in its original packaging in a cool, dry location. 

INSPECTION

Before each use, check unit for any cracks in the enclosure, remote control, cords, 
and plugs. Make sure there are no exposed wires. Do not use if any of the above 
conditions are found.

TROUBLESHOOTING

· Ensure that the (4) Power Light Indicator is on when pressing 

buttons. This turns on 3-5 minutes after the fog machine 
warms up. 

· There may be an issue with the fog machine instead of the 

fog machine timer, please see fog machine's TROUBLE-
SHOOTING section. 

Timer is not activating 
the fog machine.

Even with a timer, fog 
machine will not 
produce constant fog, 
it stops and starts

Fog output burst is too 
long/short. 

Missing parts

Still experiencing an 
issue

Issue

Correction

This is how the fog machine is supposed to work. You will 
need to wait for the machine to reheat between fog bursts. 
With the Fog Machine Timer, the fog spray will automatical-
ly activate according to the adjusted settings. The fog 
machine will still need to reheat between each burst of fog. 

Try adjusting the (2) Duration Dial for a longer/shorter blast 
of smoke and see which position matches your preference. 

Please call customer service at 1-877-527-0313 so a 
replacement can be sent to you.

Time between fog 
blasts is too 
short/long. 

Try adjusting the (1) Interval Dial for a longer or shorter wait 
time between blasts. See which position matches your 
preference. 

Please call customer service at 1-877-527-0313 for further 
assistance.

Item Code: 21SV01974
Model #: FT-A
Rating Voltage: 120V, 60Hz

TECHNICAL SPECIFICATIONS

INSTRUCTION

1. Connect the power control (9) 

Cord to the socket at the 
back of the Fog Machine.

2. Push the red (7) Power Button 

in the middle. After the fog 
machine is ready, the red 
(4) Power Light Indicator 
on the remote will light 
up, indicating that the fog 
machine has warmed up.

3. When the green (8) Manual 

Button is pushed only 
when the red (4) Power 
Light Indicator is on, the 
Fog Machine will spray fog. 
While pressing this button, 
the green (3) Manual Light 
Indicator will  activate. When 
the button is released, the 
light and fog deactivate. 

4. If you push the yellow (6) 

Timer Button only when the 
red (4) Power Light Indicator 
is on, the yellow (5) Timer 
Light Indicator will activate 
and the Fog Machine 
will release bursts of fog 
according to the adjusted 
timer. 

1

2

3

· (2) Duration Dial: 0.5 second 

to 10 seconds. For example, 

turn the dial clockwise to its 

limit. The Fog Machine will 

spray fog for a duration of 

approximately 10 seconds.

· (1) Interval Dial: 10 seconds 

to 200 seconds. For instance, 

turn the dial clockwise to 

its limit. The controller will 

activate the Fog Machine fog 

spray approximately every 200 

seconds.

2 DIALS SET  THE INTERVAL 
AND DURATION TIMES:

Push the green (8) Manual 

Button and the Fog Machine 

will release a burst of fog 

for the duration the button 

is held or until the machine 

needs to reheat. 

4

Reviews: