● Keep away from flames and flammable/explosive substances to avoid fire or explosions.
Never pour flammable liquids such as gas, perfume etc. into the fog machine.
● Keep product and fog liquid out of reach of children. Use only under adult supervision.
● Do not spray in the direction of flames or people. Stay at least 20 inches (50cm) from the
nozzle at the front of the unit.
● Do not obstruct the nozzle.
● Do not open unit. No user serviceable parts inside, please refer to your vendor. Only an
electrician can change the power cord.
● Clean unit before storage to avoid damages.
PARTS LIST
A. Fog Machine
B. Remote
C. Power Cable
D. Fog Liquid (not included)
E. Handle F. Handle Screw (2 Pieces)
illustration 1
illustration 2
A
B
F
C
D
E
GENERAL ASSEMBLY AND OPERATION
INSTRUCTIONS
Please follow all directions below and as marked on the fogger while
in use:
1. Remove all the packing before use. Note: Please contact the store
if you find any broken or missing parts. Place the unit on a flat,
level surface. Plug the remote connector into the 3-pin connector
located on the back of the Fog machine.
2. Secure the handle with the handle screws.
(See illustration 1)
3. Unscrew the tank lid on the reservoir tank towards the back of the
Fog Machine and pour the Fog Liquid inside. Do not spill Fog
Liquid onto the unit. Do not overfill. If liquid gets into Fog Machine,
allow unit to dry completely before plugging in. Close the lid to the
reservoir tank tightly. Always make sure there is enough Fog
Liquid in the tank before using the Fog Machine.
(See illustration 2)
4. Connect the unit with proper power supply (120VAC).
Turn on the
switch on the back of the unit.