Step 3
Step 3-A
Step 4
Step 4-A
Step 5
Step 6
Release the horse bridle
Following arrows, Turn neck
clockwise to lock in place.
Following arrows, Turn head
clockwise to lock in place.
3
4
Small Tabs
Small Tabs
Line up the two small tabs
Line up the two small tabs
Locking
Clip
Locking
Clip
Close the “Locking Clip”
when the Zombie Horse’s
neck is assembled
Return the body to the standing position. Adjust the
four legs to a suitable position that gives the
greatest amount of stability.
Close the “Locking Clip”
when the Zombie Horse’s
head is assembled
OFF/ON
Turn switch to on position
BATTERY REPLACEMENT & ITEM FUNCTION:
Requires 3 “AA” batteries (not included).
1. Remove the battery compartment cover, which is
located under the mouth. Using a small
screwdriver, remove the safety screw and then
remove the battery compartment cover (as
shown in the diagram)
2. Clean the battery contacts and also those of the
device prior to battery installation.
3. Insert 3 new “AA” batteries with correct polarity
and replace cover and safety screw.
4. The ON/OFF switch is located on the battery
compartment. Move switch to "ON" position for
sound activated mode. Clap your hands or make
a loud noise to activate LED lights and play a full
version of sounds. Switch to the “OFF" position
to activate the TRY-ME feature. Press the
TRY-ME button for a short-version demonstration.
6. Replace batteries if the light becomes dim or the
sound is distorted or faint.
A
B
G
G
H
C
E
F
D
