ASSEMBLY
1 Assembling the Tail and Adipose Fins
Insert the connecting rods on the top of Tail (D) into the connecting holes
on the bottom of Body (C). Insert the connecting rods on the top of the
Adipose Fins (G) into the matching holes on the Body (C) and fasten
at connecting loops with Plastic Ties (K).
2 Assembling the Bill / Mouth and Head
The Bill / Mouth (A) comes with metal connecting bars on the top and bottom
of the opened end. Insert the hooked end of the metal bars into the metal
frame on the top of Head (B). Insert the connecting rods on the bottom of
Mouth (A) onto the opening at the top of the Head (B). Insert the connecting
rods on the bottom of Head (B) into the connecting holes on the top of Body
(C) and fasten at the connecting loops with Plastic Ties (K).
3 Assembling the Pectoral Fins and Dorsal Fins
Insert the connecting rods on the Pectoral Fins (E) into the matching
connecting holes on the Head (B) and Body (C). Insert the connecting
rods on the front and rear Dorsal Fins (F) into the matching connecting
holes of the Head (B) and Body (C).
4 Assembling the Light String
Wrap the Light String (H) around the Body of Billfish then secure the Light String
with the Plastic Ties (K) at the metal frame locations sspicified in the diagram
below.
5 Assembling the Ground Stakes
Insert Ground Stakes (L) over the metal frame on the Tail and the Adipose
Fins per the diagram below then into the ground firmly.
D
C
G
K
G
A
B
C
K
E
C
F
F
B
E
H
E
K
L
