ASSEMBLY
1 Assembling the Legs to Body of Deer
Insert the connecting rods on the Front and Hind Leg of Deer (E,F) into
the connecting holes on the underside of the Body of Deer (D). The Legs
come with metal bars attached to stabilize the Deer. Insert the hooked
end of the metal bars into the metal hole on the opposite Leg.
2 Assembling the Head/Neck and Tail to Body of Deer
Insert the connecting rods on the Head/Neck of Deer (C) into the connecting
holes on the Body (D). Fasten the Legs to Body at the connecting loops with
Plastic Ties (J). Insert the connecting rod on the Tail of Deer (G) into the
connecting hole at the rear of Body (D).
3 Assembling the Antlers and Ears to Head/Neck of Deer
Insert the connecting rods on both Antlers and Ears (A,B) into the
matching connecting holes at the top of Head/Neck of Deer (C). [Note:
The ears go to the outside of the Antlers]. Fasten the Head/Neck to
Body at the connecting loops with Plastic Ties (J).
4 Assembling the Ground Stakes
Insert Ground Stakes (K) over the metal frame of each hoof then into the
ground firmly.
F
E
D
D
G
C
J
J
A
C
B
D
K
