Step 8. Plug the power cord into a proper outlet. This tree comes with a
control box to change functions. This tree is Color Changing, the
9 lighting options available are:
1.
Steady On
2.
Steady Warm White
3.
Flashing Warm White
4.
Fade In and Fade Out Warm White
5.
Steady Multicolor
6.
Flashing Multicolor
7.
Fade In and Fade Out Multicolor
8.
Sequential Multicolor & Warm White
9.
Color Changing
These functions can be changed by using the control box.
Please see Instructions of control box as below.
Operation
Turning on the tree
Step 1. Connect each tree section well and plug the power cord into a wall
outlet.
Instruction of control box
Instruction of control box
1.
Press the ON/OFF Timer button on control box more than 1 second
to turn on and off timer function.
2.
Press the ON/OFF Timer button on control box for more than 2
seconds to select below timer hours:
i.
Indicator lights of timer on control box turn on red:
The tree lights will automatically run through a 2-hours
ON, 22-hours OFF cycle.
ii.
Indicator lights of timer on control box turn on green:
The tree lights will automatically run through a 4-hours
ON, 20-hours OFF cycle.
iii.
Indicator lights of timer on control box turn on blue:
The tree lights will automatically run through a 6-hours
ON, 18-hours OFF cycle.
iv.
Indicator lights of timer on control box turn on yellow:
The tree lights will automatically run through an 8-hours
ON, 16-hours OFF cycle.
No memory mode on timer whether the tree or the timer is
re-started.
3.
Press the Function button to select the lighting functions below:
1)
Steady On
2)
Steady Warm White
3)
Flashing Warm White
4)
Fade In and Fade Out Warm White
5)
Steady Multicolor
6)
Flashing Multicolor
7)
Fade In and Fade Out Multicolor
8)
Sequential Multicolor & Warm White
9)
Color Changing
There is memory mode on Function adjustment.
Maintenance
Replace the fuse.
1.
Power cord fuse replacement (replaceable 3 amp, 125 volt fuse is
located in spare parts bag):
2.
Grasp plug and remove from the receptacle or other outlet device. Do
not unplug by pulling on cord.
3.
Open fuse cover. Slide open the fuse access cover on
back of control box.
4.
Remove fuse carefully.
5.
Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with
product).
6.
Close fuse cover. Slide closed the fuse access cover.
7.
Risk of fire. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment plug
is damaged.
CAUTION! –
ALWAYS UNPLUG YOUR TREE FROM ITS
POWER SOURCE BEFORE ATTEMPTING FUSE REPLACEMENT.
CAUTION:
To reduce the risk of fire or electric shock, do not
attempt to replace lamps or modify string.
