HOMCOM RFS-12R, Assembly Instruction Manual

Page: 2 / 7

PERFORMANCE PARAMETERS
Model Rating Power Power Max Water Injection Rate Specification
RFS-12R 220~240V 50Hz 75W 8L Cooling only
FUNCTIONS

Principle of Cooling : Water is taken from the water tank by pump to the top, then the water
drops into paper evaporator . When the water in paper evaporator evaporates to water vapor, the
air is cooled. People will feel cool wind when the cool air is delivered by fan.

Electronics control: safe and durable, attractive appearance.

Adjustable speed and fan mode: have three speeds and fan types, blow at a wide angle.

Cool: adopt the technology of ice crystal cooling and air humidifying, fall down the
temperature from air vent and raise relative humidity, prevent air drying.You could put the ice
box into the top tank and down tank to make the cooling be better.

Deliver wind at a wide angle: swing the blades automatically, deliver wind at horizontal wide
angle. Swing the blades transversely manually, select the direction discretionarily.

Far-range remote control: 6 meters far-range remote control, receive at 60 degree wide angle.

Buzzer: vocalise when operating the effective keypad, use conveniently.
ASSEMBLING AND WATERING
1. Assembling castors: put the appliance on a flat surface, take out the wrench from foam box, then
assemble the castors.
2. Watering: pull 1/3 water tank, then add clean water (map 1)
Attention:
a. Pay attention to the level of water tank when add water.(map 2)
b. The level of water tank should not over “MAX” scale at any time, when humidifying, the
total level of water tank should not below “MIN” scale.
c. Put ice or frozen ice box to the water tank if you want to strengthen the efficiency of
cooling. But the total level of water tank should not over “MAX” scale.