1
2
3
4
5
1. Insert the
Ø12 rod
through hole on boom (right).
2. Slide a
inner bushing
onto the Ø12 rod.
3. Align the holes on each side of vhicle body with the holes on boom (left),
insert the
Ø12 rod
through the holes on vehicle body, slide a
inner bushing
onto the Ø12 rod, continue pushing the
Ø12 rod
till it passes through the hole
on boom (left).
4. Slide a
Ø12 washer
onto the Ø12 rod.
5. Tighten a
Ø10 lock nut
to the end of Ø12 rod with a spanner.
HINT: An extra spanner has been provided to hold the locknut on the other
side of the Ø8 rod while tightening the locknut on the other side.
Assemble the Bucket-4 │ 20
The follow steps are only for TYPE A.
TYPE A COMPLETED!
TYPE A
Ø12 rod
Ø10 lock nut
Ø12 washer
Inner bushing
Inner bushing
Boom (right)
Vehicle body
