1. You will need one button battery (provided) to operate the Computer.
2. To select the function you want, press the MODE button and then select the
function of choice from the table above.
3. To reset the Computer, hold down the MODE button for 4 seconds.
4. The Computer will automatically turn off after 4 minutes when the bike is not in
use. Press any key to restart.
5. To monitor your heart rate, place your thumbs on the heart rate sensor for a few
seconds and check the display.
6. To adjust the resistance, turn the tension control to the right (harder), or to the
left (easier) .
7. If there is an improper display on the Computer, please replace both batteries
with new ones at the same time.
8.
To move the bike, hold onto the saddle support pole, lift and push forward.