HOMCOM 920-077V70, Assembly & Instruction Manual

Page: 17 / 23

-16-
After entering, the last set height
limit is displayed. Press
,
button to adjust. Press button to
confirm, save the current value and
exit setting mode.
Press button ,it displayed the last set height unit
value .Use , button to flip in the option (SI ,IN-
)After selecting ,Press button to save the current
option value and keep the current for 2 seconds to exit
Press button ,it displayed the last set buzzer switch
status ,Use button to flip in the options (Off ,On ).After
selecting, press button to save the current option
value, and keep the current option for 2s to exit the setting
mode.
the setting mode .
Press button ,it displayed the last set brightness of the
handle .Use , button to lip in the options
(L,N,H).After selecting, press button to save the cur-
rent option value, and keep the current option for 2s to
exit the setting mode.
Press button ,it displayed the last set collision velocity
position Use , button to flip in the options (Off
,L,N,H ).After selecting, press button to save the cur-
rent option value, and keep the current option for 2s to
exit the setting mode.
Unit
Brightness
Collision
Force
Set Height
Main menu interface Submenu interface.
SI Metric
Normal
High
Off
Light
Normal
Heavy
Original
Low
High
Low
Inch
description
After entering by
press S button ,
you can use the
, button to flip
in the options
(Original, Low,
High). After select-
ing, press
button to enter the
parameter settings
of the correspond-
After entering, the starting height of
the last setting is displayed. Press
,
button to adjust. Press
button to confirm, save the
current value and exit setting mode.
After entering, the last set height
limit is displayed. Press
,
button to adjust. Press button to
confirm, save the current value and
exit setting mode.
Off
On
Beep