6
Preparation
Put away the clothes
Pull out the water tank, turn the water tank over, open the water inlet cover (14
)
, and add
100g clean water into the water tank. In order to prolong the service life of the product, it
is recommended to use pure water or distilled water, and close the water inlet cover.
Put the water tank on the machine, plug in the power supply and start heating.
Use of dry ironing function
1. After the power is plugged in, the indicator light on the top of the machine flashes,
indicating that the machine is heating and is in a delayed state. When the indicator light
is always on, it indicates that the heating is completed, and clothes can be ironed.
Note: it is necessary to confirm whether the fabric is suitable for this function.
Use of steam function
The steam function can be used in ironing and Garments ironing.
1. Press the steam button A (7 on the handle to switch to small steam, and the small
)
steam indicator light will be on. Press the steam button A (7 again to switch to large
)
steam, and the large steam indicator light will be on.
2. Continue to press the steam button A (7
)
, and it will cycle to dry hot state again.
When it is in the delay state, whether it is switched to the dry hot or steam state, the
corresponding indicator light is in the flashing state, and the corresponding function
cannot be used until the indicator light is constantly on.
Use of Self-cleaning function
To prolong the life of your iron, we recommend that this procedure be carried out at
regular intervals (once or twice a month). this is an activity that allows you to remove
the limescale deposits and the impurities from inside the soleplate thanks to the steam
and hot water, we suggest you to carry out this operation over a basin.
1. To use the cleaning function, First, fill the tank with water. After Plug in the power
supply, the soleplate should be kept facing down. When the indicator light is always
on, Press and hold the steam button A
（
7
）
for 5 seconds to enter the cleaning state.
When the product is in the cleaning state, the cleaning function indicator will be on.
The cleaning time is 1 minute. During this period, water vapor mixture flows out from the
soleplate hole. Be careful not to drop on the foot and burn.
EN
