HOMCOM 820-295V90 Service Manual Download Page 2

1

General Safety Warning:

1. Read all instructions carefully before using.

2.  Make  sure  the  voltage  is  the  same  as  that  indicated  on  the  rating  plate  of  the 
appliance.

3. Do not operate this appliance if the cable or plug becomes damaged.

4.  Keep  the  appliance  and  cable  away  from  sources  of  heat,  sharp  objects  or 
anything that may cause damage. 

5. If the cord is damaged, it must be replaced by the manufacturer, its service agent 
or similarly qualified persons in order to avoid a hazard.

6.  Ensure  the  appliance  is  switched  off  before  connecting  to  the  mains  power 
supply.

7. Switch off the power supply and disconnect from mains supply when not in use, 
before cleaning or other maintenance.

8. Turn off the light Switch, disconnect the power supply.

9. The heater must not be located immediately below a socket-outlet.

10.  Do  not  operate  in  areas  where  gasoline,  paint  or  other  flammable  liquids  are 
used or stored.

11. Indoor use only.

12. In order to avoid overheating, do not cover the heater.

13. To prevent a possible fire, do not block air intakes or exhaust in any manner.

14. Don't touch the hot surfaces.

15.  Do  not  insert  or  allow  foreign  objects  to  enter  any  ventilation  or  exhaust 
opening, as this may cause an electric shock, fire or damage to the appliance. 

16. Always  ensure  that  hands  are  dry  before  operating  or  adjusting  any  switch  on 
the product or touching the plug and socket-outlet. 

17.  This  appliance  is  not  intended  for  use  by  persons  (including  children)  with 
reduced  physical,  sensory  or  mental  capabilities,  or  lack  of  experience  and 
knowledge, unless they have been given supervision or instruction concerning use 
of the appliance by a person responsible for their safety.

18.  Children  should  be  supervised  to  ensure  that  they  do  not  play  with  the 
appliance.

19. Do not leave this appliance unattended when it's in use.

20.  The  most  common  cause  of  overheating  is  deposits  of  dust  or  fluff  in  the 
appliance.  Ensure  these  deposits  are  removed  regularly  by  disconnect  the 
appliance and vacuum cleaning air vents and grilles. 

Summary of Contents for 820-295V90








Reviews: