SUPPLEMENTARY EXPLANATION:
1.When the machine is in the reservation state, it is not displayed except for the reserva-
tion mark and time content. If you press the "mode" key, the corresponding mode is
displayed. At this time, you can use the mode key or ▲ / ▼ key to select the mode. If there
is no such operation for 5 seconds, the mode icon will go out again. If you press the "▲"
and "▼" keys, the set temperature content flashes. At this time, you can continue to press
the ▲ / ▼ key to adjust, and it will go out again after 5 seconds of no operation;
2.The machine in working state has no operation after 3 minutes of operation, and auto-
matically enters the state of extinguishing the screen; pressing any button in the state of
extinguishing the screen can wake up the body. The machine in the reservation state does
not enter the screen off, the reservation icon is always on, and the digital tube is always on
to show the remaining time of the reservation.
3.If the sensor is short-circuited, it will flash "EH"; if the sensor is open, it will flash "EL".
4.The temperature control method is as follows:
T = set temperature (7 ~ 35
℃
), t = ambient temperature
When the machine works in ECO mode
When the machine works in one of Hi, Mid and Lo modes
TEMP UP
TEMP DOWN
t < T
Hi
t > T+1
OFF
t = T
Hi
T < t
≤
T+1
Mid
T < t
≤
T+1
Mid
t = T
Mid
t > T+1
OFF
t < T
Hi
TEMP UP
TEMP DOWN
t < T
Hi/Med/Low
t
≥
T+1
OFF
t = T
Hi/Med/Low
t =T
OFF
t
≥
T+1
OFF
t < T
Hi/Med/Low
(1)Avoid scratching or scratching the heater to avoid rust due to damage to the surface
coating.
(2)When not in use for a long time, clean the electric heater with a soft cloth and store it in
the packing box.
CLEANING AND MAINTENANCE
5
