2
11. Do not use near or point the heater to furniture, animals, curtains or other inflammable objects.
Keep combustible materials such as furniture, bedding and any other combustible materials at
least 1 metre from the front and sides, and from the rear of the heater.
12. Do not place the cord under carpet or cover with throw rugs or furniture. Arrange the cord so that
it cannot be tripped over.
13. Do not place the heater on bedding or on thick and long pile carpet where the openings may be
blocked.
14. To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain,
moisture or any liquid other than those necessary for correct operation of the product.
15. This product should not be used in the immediate vicinity of water, such as bathtub, washbowls,
bathroom swimming pool etc. where the likelihood of immersion or splashing could occur.
16. Switch off and unplug from outlet when not in use, before assembling or disassembling parts and
before cleaning. Remove by grasping the plug - do not pull on the cord.
17. A common cause of overheating is deposits of dust and fluff entering the heater. Ensure these
deposits are removed regularly by unplugging the heater, allowing it to cool and cleaning as
described in the Care, Cleaning and Storage section.
18. Be sure that no other high current appliances are plugged into the same circuit with your heater
as an overload can occur.
19. Avoid the use of an extension cord as the extension cord may overheat and cause a risk of fire.
20. Do not use the appliance for other than its intended use.
21. Do not use outdoors. FOR INDOOR USE ONLY.
22. Do not leave the appliance unattended when switched on.
23. Do not place objects on the product or allow objects to obstruct the inlet or outlet openings, or
operate in close proximity to walls or curtains, etc. Do not cover the unit when in operation.
24. Do not locate the heater immediately below a socket-outlet.
25. The use of attachments or accessories not recommended or sold by the product distributor may
cause personal or property hazards or injuries.
26. This product is intended for normal domestic/household use only.
Use this heater as described in this manual. Any other uses, not recommended by the manufacturer,
may cause fire, electric shock, or injury to persons and may void the warranty.
1.Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label of the unit.
2.When plugged in, turn on the Main power switch at the back of the unit.
3.When in Standby mode, only press on the control panel will respond to your touch,
and the LED display shows the room temperature. Press
to access the rest of
the control panel.
(a).Low Power: 1000W (Press to switch it, one light on )
(b).High Power: 2000W (Press to switch it, two light on together )
© TIMER: Press this button repeatedly to set a period after which the heater will turn
itself off (From 0 hour -8 hours)
(d) + , - : adjust room temperature .Temperature setting from 10-49
℃
. Press “ ” to
increase the desired temperature and “ “ to decrease the desired temperature.
When the room temperature lower 4
℃
than the settled temperature of unit, it's high power
working, lower 2
℃
, lower power working, if room temperature reach the setting
temperature, the heating stop, fan is permanently on till room temperature lower than the
setting temperature 2
℃
, the unit automatically return to lower power heating, if room
temperature lower 4
℃
, higher power heating, it's automatically return to heating.
(e) Swing : Press to activate swing. Press it again to cancel.
(f) Press to turn off the heater, the unit will keep working 30 seconds of cool air after
turn off it . this design can protect item use longer.
USING THE HEATER