HOMCOM 800-102V70, Assembly & Instruction Manual

Page: 4 / 11

3
A) Mixer unit (①Eject button ②pulse button ③Speed selector)
B) Dough hook
C) Beater(wire)
D) Whisk
E) Bar blender
F) Beaker with lid (for bar blender)
G) Chopper (①Chopper lid ②Chopper blade ③Chopper bowl)
Getting to Know Your Hand Mixer
Congratulations on the purchase of your new Hand Mixer.
Before using your new Hand Mixer, it is impor tant that you read and follow
the instructions in this booklet even if you feel you are familiar with this type
of appliance. Find a place to keep this booklet handy for future reference.
Attention is par ticularly drawn to the section dealing with “IMPORTANT
SAFEGUARDS”
.
This appliance has been designed to operate from a standard domestic
power outlet. It is not intended for industrial or commercial use.
Before First Use
• Remove and safely discard any packaging material and promotional labels
before using the appliance for the first time.
• Before using your Hand Mixer for the first time, wash the beaters, dough
hooks, whisk , bar blender, beaker, chopper in warm soapy water with a soft
cloth. Rinse and dry thoroughly.
• When first using your hand mixer, you may notice an odour from the motor.
This is normal and will dissipate as the motor is run in.
WARNING: Do not plug the power cord into an electrical outlet until the
accessories such as beaters, dough hooks, whisk , bar blender, chopper
have been securely attached.Make sure the Speed Selector is set to the
“
0 ”(Off ) position.
Control Buttons
• Eject button - to release beaters, dough hooks, whisk.
• 1-5 Speed Selector - for beaters, dough hooks, whisk light, medium and
heavy mixing; M speed selector - for bar blender and chopper function.
• pulse button- Speed Selector on 1-4, Hi-speed, for heavy mixing; Speed
Selector on M, press to start the bar blender and chopper function, release
to stop the bar blender and chopper function.
Installing The Attachments
• Ensure the appliance is unplugged from the power socket.
• Ensure that the speed selector is set to the “ 0” (Off ) position.
• The beater stem ends are shaped to fit the corresponding apertures in the
mixer .