Refrigerator (BC-50A)
800-061
~ 2 ~
●
Before cleaning the refrigerator, ensure it is unplugged. Never clean the unit with an acid preparation,
medical, dilution, gasoline, oil, or any other kind of chemical substance that could damage the
refrigerator.
●
Repair should only be made by an authorised service centers.
Caution
：
1. To reduce the risk of fire, replace only with same type fuse.
2. Free standing installation only.
3. Do not use extension cords.
Warning:
1.
If the supply cord is damaged, it must be replaced by the manufacturer or service agent or similarly
qualified person to avoid hazard.
2.
Please remove the door before disposing the unit.
3.
Please keep the appliance away from any flammable substances.
4.
To avoid a hazard due to the instability of the appliance, it must be fixed according to the instructions.
5.
Do not use electrical appliances inside the food storage compartments of the appliance.
6.
Children should be supervised to ensure that they do not play with the appliance.
7.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety
.
8.
Keep in a well-ventilated room and clear of obstruction.
IV. OPERATION
Clean the inside with a damp cloth before use.
Fix the shelves securely, according to the instruction.
If using for the first time, (or after a long time), you should adjust the temperature to minimum and
have the cabinet empty running for 2 hours, before putting your wine inside and adjust the thermostat
to the desired temperature.
When the power is connected, the cooling system starts to work. The TEMP-ADJ button (thermostat)
is pre-set, meaning if the temperature in the wine cooler reaches the point set, Self-control
Temperature System stops cooling system allowing the temperature in the cabinet to rise gradually.
When the inside temperature rises above the set point, Cooling Self-control Temperature will start
again, the cellar enters cooling cycle.
To adjust the temperature in the cabinet, turn the knob to adjust the temperature. The temperature
range is 5-12
℃（
Min:5
℃
, Max:12
℃）
, When the thermostat is set on the desired temperature, the
automatic temperature control system begins to work and the cooling system goes into linear
temperature state. At this stage, the input power will change with the change of temperature inside
the wine cooler case.
Summary of Contents for 800-061
Page 7: ......
