7
EN: ESPRESSO MAKER |
Instruction Manual
2. Set steel mesh into metal funnel (no coffee in steel mesh), then put the metal funnel under the metal funnel holder
(see
Fig.3. - A)
, and turn it anticlockwise until it is fixed tightly
(see Fig.3. - B and C)
.
3. Place an espresso cup you have prepared on removable cup shelf.
4. Then connect the appliance into power supply. Make sure the steam knob is at the “O” position.
5. Press the ON/OFF button “
” to turn on the unit, the power indicator (red) will illuminate, make sure the coffee/steam
button“
”/“
” is at the higher position.
6. Press down the pump control button“
” to the lower position, when there is water flowing out, close the pump
immediately by pressing the pump control button“
” again to the higher position. The purpose of the step is to pump
the water of the tank into the housing.
7. When the coffee indicator (green) is illuminated, and you should press down the pump control button “
” again, there
will be hot water flowing out.
8. After water has flown for 20S, press the pump control button“
”. The preheating is finished.
MAKE ESPRESSO COFFEE
1. Remove the funnel by turning it clockwise.
2. Add ground coffee to steel mesh with measuring spoon, a spoon ground coffee power can make about a cup of top-grade
coffee, then press the ground coffee powder tightly with the tamper.
3. Set steel mesh into metal funnel (no coffee in steel mesh), then put the metal funnel under the metal funnel holder
(see
Fig. 3. - A)
, and turn it anticlockwise until it is fixed tightly
(see Fig. 3. - B and C)
.
4. Pour out the hot water in the cup. Then place the hot cup (yourself cup) on removable cup shelf.
5. Make sure the steam knob is at the “O” position and the coffee/steam button “
” is at the higher position.
6. At the time, the coffee indicator (green) is illuminated, once the lamp illuminates, you should press down the pump control
button“
” to the lower position, wait for a moment, there will be coffee flowing out.
7. You should press and release the pump control button “
”to the higher position manually when desired coffee is
obtained or the color of coffee changes weak obviously.
8. After finishing making coffee, press the ON/OFF button “
”, and the power indicator and coffee indicator go out and the
coffee maker stops working, your coffee is ready now.
WARNING: do not leave the coffee maker unattended during making coffee, as you need operate manually sometimes!
Note: During brewing coffee or making steam, it is normal that the ready indicator is likely to extinguish, it only means that
the heater is heating up to keep the temperature at the standard range.
9. You can take the metal funnel out by turning clockwise, then pour the coffee residue out with the steel mesh pressed by
press bar.
10. Let them cool down completely, then rinse under running water.